Skip to content
TOP MENU

screwguru.com

  • Home
  • Shop
  • Best Sellers
  • New Arrival
  • Promotion
  • Cart

Gates Rubber

Showing 136–144 of 1315 results

  • Sale! Don’t Miss Out Gates 93364250 8V4250 Super HC Belts <ul><li>Cross Section: 8V</li><li>Top Width: 1"</li><li>Depth: 7/8"</li><li>Outside Circumference: 425"</li><li>Material ID: 93364250</li></ul>The Gates Super HC V-belt combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. It transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC V-belts also have exclusive Gates construction features for longer life on your drives!<ul><li>Meets RMA oil and heat resistant standards and static conductivity requirements.</li><li>Up to 300% capacity increase over classical belts.</li><li>Temperature Range: -30C to +60C (-22F to +140F).</li></ul>

    Don’t Miss Out Gates 93364250 8V4250 Super HC Belts
    • Cross Section: 8V
    • Top Width: 1″
    • Depth: 7/8″
    • Outside Circumference: 425″
    • Material ID: 93364250
    The Gates Super HC V-belt combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. It transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC V-belts also have exclusive Gates construction features for longer life on your drives!
    • Meets RMA oil and heat resistant standards and static conductivity requirements.
    • Up to 300% capacity increase over classical belts.
    • Temperature Range: -30C to +60C (-22F to +140F).

    Rated 0 out of 5
    $531.54 Original price was: $531.54.$212.62Current price is: $212.62.
    Add to cart
  • Sale! Editor’s Pick Gates 7709-5036 P36-5MGT-25-MPB <h5>Gates P36-5MGT-25-MPB PowerGrip GT2 and Poly Chain GT2 - 5M Sprocket</h5><ul><li>Pitch: 5mm</li><li>Width: 25mm</li><li>Pitch Diameter: 2.256"</li><li>Number of Teeth: 36</li><li>Material ID: 77095036</li></ul>PowerGrip GT2 Sprockets are specially engineered and manufactured to work with PowerGrip GT and PowerGrip GT2 belts, delivering maximum performance and superior reliability.<ul><li>Precision manufactured and static balanced to eliminate sprocket wobble.</li><li>Designed to keep the load closer to the bearing and extend reducer life.</li><li>Easy installation and removal due to full split in bushing design.</li><li>Precise sprocket design produces positive, press fit to shaft.</li><li>Space-saving design results in more shaft space.</li></ul>

    Editor’s Pick Gates 7709-5036 P36-5MGT-25-MPB

    Gates P36-5MGT-25-MPB PowerGrip GT2 and Poly Chain GT2 – 5M Sprocket
    • Pitch: 5mm
    • Width: 25mm
    • Pitch Diameter: 2.256″
    • Number of Teeth: 36
    • Material ID: 77095036
    PowerGrip GT2 Sprockets are specially engineered and manufactured to work with PowerGrip GT and PowerGrip GT2 belts, delivering maximum performance and superior reliability.
    • Precision manufactured and static balanced to eliminate sprocket wobble.
    • Designed to keep the load closer to the bearing and extend reducer life.
    • Easy installation and removal due to full split in bushing design.
    • Precise sprocket design produces positive, press fit to shaft.
    • Space-saving design results in more shaft space.
    Rated 0 out of 5
    $102.24 Original price was: $102.24.$40.90Current price is: $40.90.
    Add to cart
  • Sale! Editor’s Pick Gates 77183056 8MX-56S-36 Poly Chain GT2 Sprockets <ul><li>Pitch: 8mm</li><li>Width: 36mm</li><li>Pitch Diameter: 5.614"</li><li>Number of Teeth: 56</li><li>Material ID: 77183056</li></ul>Genuine, strong, durable sprockets designed for use with high power density Gates Poly Chain Carbon Volt, Poly Chain GT2, and Poly Chain GT Carbon belts.<ul><li>Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer.</li><li>Poly Chain GT2 Sprockets keep overhung load below manufacturers' recommendation.</li><li>Precisely manufactured and statically balanced to ISO 1940 (1973) to class G16.</li></ul>

    Editor’s Pick Gates 77183056 8MX-56S-36 Poly Chain GT2 Sprockets
    • Pitch: 8mm
    • Width: 36mm
    • Pitch Diameter: 5.614″
    • Number of Teeth: 56
    • Material ID: 77183056
    Genuine, strong, durable sprockets designed for use with high power density Gates Poly Chain Carbon Volt, Poly Chain GT2, and Poly Chain GT Carbon belts.
    • Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer.
    • Poly Chain GT2 Sprockets keep overhung load below manufacturers’ recommendation.
    • Precisely manufactured and statically balanced to ISO 1940 (1973) to class G16.

    Rated 0 out of 5
    $222.40 Original price was: $222.40.$88.96Current price is: $88.96.
    Add to cart
  • Sale! Editor’s Pick Gates 78824001 P112-20M-115 PowerGrip HTD Sprockets <ul><li>Pitch: 20mm</li><li>Pitch Diameter: 28.071"</li><li>Belt Width: 115mm</li><li>Number of Teeth: 112</li><li>Material: Cast Iron</li><li>Bore Range: 2" - 5 1/2"</li><li>Material ID: 78824001</li></ul>PowerGrip HTD Sprockets are engineered specifically for use with your Gates PowerGrip HTD belts.<ul><li>Full split in bushing allows for easy installation and removal.</li><li>Precise sprocket design produces positive, press fit to shaft.</li><li>Precision manufactured and static balanced to eliminate sprocket wobble.</li><li>Warning: Do not use these sprockets with rim speeds in excess of 6, 500 fpm.</li></ul>

    Editor’s Pick Gates 78824001 P112-20M-115 PowerGrip HTD Sprockets
    • Pitch: 20mm
    • Pitch Diameter: 28.071″
    • Belt Width: 115mm
    • Number of Teeth: 112
    • Material: Cast Iron
    • Bore Range: 2″ – 5 1/2″
    • Material ID: 78824001
    PowerGrip HTD Sprockets are engineered specifically for use with your Gates PowerGrip HTD belts.
    • Full split in bushing allows for easy installation and removal.
    • Precise sprocket design produces positive, press fit to shaft.
    • Precision manufactured and static balanced to eliminate sprocket wobble.
    • Warning: Do not use these sprockets with rim speeds in excess of 6, 500 fpm.

    Rated 0 out of 5
    $6,459.04 Original price was: $6,459.04.$2,583.62Current price is: $2,583.62.
    Add to cart
  • Sale! Editor’s Pick Gates 84002295 4L295 Truflex V-Belts <ul><li>Cross Section: 4L</li><li>Top Width: 1/2"</li><li>Thickness: 5/16"</li><li>Outside Circumference: 29.50"</li><li>Material ID: 84002295</li></ul>Truflex belts are engineered with superior length stability for minimal take-up requirements, perfect for all industrial, light-duty applications, including fractional horsepower (FHP) motors and applications using backside idlers. Flex-bonded cords are strongly secured to the belts body for equal load distribution and absorption of bending stress without cord deterioration. Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. The Flex-Weave Cover is constructed for longer cover life, providing the belt's core with extended protection from oil, dirt, and heat.<ul><li>Meets RMA oil and heat-resistant standards and static conductivity requirements.</li><li>Note: Truflex belts are offered in cross sections 2L (0), 3L (1), 4L (2), 5L (3).</li><li>Runs with smooth, quiet operation.</li></ul>

    Editor’s Pick Gates 84002295 4L295 Truflex V-Belts
    • Cross Section: 4L
    • Top Width: 1/2″
    • Thickness: 5/16″
    • Outside Circumference: 29.50″
    • Material ID: 84002295
    Truflex belts are engineered with superior length stability for minimal take-up requirements, perfect for all industrial, light-duty applications, including fractional horsepower (FHP) motors and applications using backside idlers. Flex-bonded cords are strongly secured to the belts body for equal load distribution and absorption of bending stress without cord deterioration. Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. The Flex-Weave Cover is constructed for longer cover life, providing the belt’s core with extended protection from oil, dirt, and heat.
    • Meets RMA oil and heat-resistant standards and static conductivity requirements.
    • Note: Truflex belts are offered in cross sections 2L (0), 3L (1), 4L (2), 5L (3).
    • Runs with smooth, quiet operation.

    Rated 0 out of 5
    $9.48 Original price was: $9.48.$4.74Current price is: $4.74.
    Add to cart
  • Sale! Editor’s Pick Gates 91814236 4/5VP2360 Predator PowerBand Belts <ul><li>Strands: 4</li><li>Sectional Top Width: 5/8"</li><li>Total Top Width: 2 1/2"</li><li>Depth: 35/64"</li><li>Outer Length: 236"</li><li>Inner Length: 236"</li><li>Material ID: 91814236</li></ul>Gates' Predator PowerBand belt design offers a solution for drives where single belts vibrate, turn over or jump off the pulleys. It consists of several V-belts joined together by a permanent, high-strength tie band allowing the belts to work together as one unit. The Predator PowerBand belt is especially designed for demanding applications and harsh environments and offers a high resistance to vibration. Specifically designed for high-demand applications, the extra heavy-duty belt construction provides extraordinary high impact strength, capacity, and wear resistance.<ul><li>Aramid Tensile Cords combine limited stretch with extraordinary strength and durability that is pound-for-pound stronger than steel.</li><li>Bareback Cover resists debris and allows the belt to slip under extreme shock load conditions, reducing heat buildup and prolonging belt life.</li><li>Multiple layer Tie Band provides excellent lateral rigidity to prevent belts from turning over or from coming off of the drive.</li></ul>

    Editor’s Pick Gates 91814236 4/5VP2360 Predator PowerBand Belts
    • Strands: 4
    • Sectional Top Width: 5/8″
    • Total Top Width: 2 1/2″
    • Depth: 35/64″
    • Outer Length: 236″
    • Inner Length: 236″
    • Material ID: 91814236
    Gates’ Predator PowerBand belt design offers a solution for drives where single belts vibrate, turn over or jump off the pulleys. It consists of several V-belts joined together by a permanent, high-strength tie band allowing the belts to work together as one unit. The Predator PowerBand belt is especially designed for demanding applications and harsh environments and offers a high resistance to vibration. Specifically designed for high-demand applications, the extra heavy-duty belt construction provides extraordinary high impact strength, capacity, and wear resistance.
    • Aramid Tensile Cords combine limited stretch with extraordinary strength and durability that is pound-for-pound stronger than steel.
    • Bareback Cover resists debris and allows the belt to slip under extreme shock load conditions, reducing heat buildup and prolonging belt life.
    • Multiple layer Tie Band provides excellent lateral rigidity to prevent belts from turning over or from coming off of the drive.

    Rated 0 out of 5
    $1,487.96 Original price was: $1,487.96.$595.18Current price is: $595.18.
    Add to cart
  • Sale! Editor’s Pick Gates 938914160 14/5VX1600

    Editor’s Pick Gates 938914160 14/5VX1600

    Rated 0 out of 5
    $1,101.45 Original price was: $1,101.45.$440.58Current price is: $440.58.
    Add to cart
  • Sale! Editor’s Pick Gates 942112410 XPB2410 Metric-Power V-Belts <ul><li>Cross Section: XPB</li><li>Top Width: 17mm</li><li>Depth: 13mm</li><li>Length: 2410mm</li><li>Material ID: 942112410</li></ul>Metric Power V-Belts are manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance. Metric Power V-Belts are ideal for use as replacements on drives that require metric cross sections in a broad range of applications, including textile mills, machine tool, and food processing.<ul><li>Flex-Bonded Cords are chemically forged to the belt body, providing equal load distribution and bending stress absorption without cord deterioration.</li><li>Patented EPDM Material construction Exceptional operating temperature tolerance (-70F to +250F) helps resists belt cracking and provides application versatility.</li><li>Proprietary construction process combines flex and load-carrying capacity with reduced stretch and superior cord adhesion properties.</li><li>Molded Notches (in lengths 3, 000mm and under) reduce thermal and bending stresses.</li><li>Meets RMA standards for oil and heat resistance.</li><li>Meets RMA static conductivity requirements.</li></ul>

    Editor’s Pick Gates 942112410 XPB2410 Metric-Power V-Belts
    • Cross Section: XPB
    • Top Width: 17mm
    • Depth: 13mm
    • Length: 2410mm
    • Material ID: 942112410
    Metric Power V-Belts are manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance. Metric Power V-Belts are ideal for use as replacements on drives that require metric cross sections in a broad range of applications, including textile mills, machine tool, and food processing.
    • Flex-Bonded Cords are chemically forged to the belt body, providing equal load distribution and bending stress absorption without cord deterioration.
    • Patented EPDM Material construction Exceptional operating temperature tolerance (-70F to +250F) helps resists belt cracking and provides application versatility.
    • Proprietary construction process combines flex and load-carrying capacity with reduced stretch and superior cord adhesion properties.
    • Molded Notches (in lengths 3, 000mm and under) reduce thermal and bending stresses.
    • Meets RMA standards for oil and heat resistance.
    • Meets RMA static conductivity requirements.

    Rated 0 out of 5
    $59.55 Original price was: $59.55.$29.77Current price is: $29.77.
    Add to cart
  • Sale! Exclusive Gates 77199704 F14MX-224S-37 Poly Chain GT2 Sprockets <ul><li>Pitch: 14mm</li><li>Width: 37mm</li><li>Pitch Diameter: 39.296"</li><li>Number of Teeth: 224</li><li>Material ID: 77199704</li></ul>Genuine, strong, durable sprockets designed for use with high power density Gates Poly Chain Carbon Volt, Poly Chain GT2, and Poly Chain GT Carbon belts.<ul><li>Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer.</li><li>Poly Chain GT2 Sprockets keep overhung load below manufacturers' recommendation.</li><li>Precisely manufactured and statically balanced to ISO 1940 (1973) to class G16.</li></ul>

    Exclusive Gates 77199704 F14MX-224S-37 Poly Chain GT2 Sprockets
    • Pitch: 14mm
    • Width: 37mm
    • Pitch Diameter: 39.296″
    • Number of Teeth: 224
    • Material ID: 77199704
    Genuine, strong, durable sprockets designed for use with high power density Gates Poly Chain Carbon Volt, Poly Chain GT2, and Poly Chain GT Carbon belts.
    • Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer.
    • Poly Chain GT2 Sprockets keep overhung load below manufacturers’ recommendation.
    • Precisely manufactured and statically balanced to ISO 1940 (1973) to class G16.

    Rated 0 out of 5
    $4,082.17 Original price was: $4,082.17.$1,632.87Current price is: $1,632.87.
    Add to cart
  • ←
  • 1
  • 2
  • 3
  • …
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • …
  • 145
  • 146
  • 147
  • →

Service

Shop

Cart

Checkout

Orders

Information

About Us

Privacy Policy

Shipping Policy

Refund and Returns Policy

Copyright © 2026 screwguru.com. All rights reserved.
0