Gates Rubber

Showing 1279–1287 of 1315 results

Sale!
Viral Gates 93886118 6/3VX1180 Super HC Molded Notch PowerBand Belts
Cross Section: 3VX
Strands: 6
Sectional Top Width: 3/8″
Total Top Width: 2 1/4″
Depth: 21/64″
Outside Circumference: 118.00″
Material ID: 93886118
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
The Tie Band assures high lateral rigidity, guiding the belt” a straight line and preventing it from coming off the drive.
Meets RMA oil and heat resistant standards and static conductivity requirements.
Rated 0 out of 5
Original price was: $376.10.Current price is: $150.44.
Add to cart
Sale!
Viral Gates 938913170 13/5VX1700 Super HC Molded Notch PowerBand Belts
Cross Section: 5VX
Strands: 13
Sectional Top Width: 5/8″
Total Top Width: 8 1/8″
Depth: 35/64″
Outside Circumference: 170.00″
Material ID: 938913170
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
The Tie Band assures high lateral rigidity, guiding the belt” a straight line and preventing it from coming off the drive.
Meets RMA oil and heat resistant standards and static conductivity requirements.
Rated 0 out of 5
Original price was: $2,985.28.Current price is: $1,194.11.
Add to cart
Sale!
Viral Gates 98000031 4836V850 Multi-Speed Belts
Top Width: 3″
Outer Length: 86.10″
Material ID: 98000031
Gates Multi-Speed belts are manufactured with a banded or bandless construction featuring high-modulus, fiber-loaded stock that offers transverse rigidity and flexibility for higher load capacity and longer service life on your variable speed drives.
Notch Design reduced thermal and bending stresses for longer life.
Smooth running construction for minimal vibration at high speeds.
Uniform composition and thickness of the undercord ensure smooth and silent running.
Rated 0 out of 5
Original price was: $516.09.Current price is: $206.44.
Add to cart
Sale!
Viral Gates 98040078 2322V661 Multi-Speed Belts
Top Width: 1 7/16″
Outer Length: 67.40″
Material ID: 98040078
Gates Multi-Speed belts are manufactured with a banded or bandless construction featuring high-modulus, fiber-loaded stock that offers transverse rigidity and flexibility for higher load capacity and longer service life on your variable speed drives.
Notch Design reduced thermal and bending stresses for longer life.
Smooth running construction for minimal vibration at high speeds.
Uniform composition and thickness of the undercord ensure smooth and silent running.
Rated 0 out of 5
Original price was: $167.40.Current price is: $66.96.
Add to cart
Sale!
Warranty Included Gates 77199039 14MX-39S-90 Poly Chain GT2 Sprockets
Pitch: 14mm
Width: 90mm
Pitch Diameter: 6.842″
Number of Teeth: 39
Material ID: 77199039
Genuine, strong, durable sprockets designed for use with high power density Gates Poly Chain Carbon Volt, Poly Chain GT2, and Poly Chain GT Carbon belts.
Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer.
Poly Chain GT2 Sprockets keep overhung load below manufacturers’ recommendation.
Precisely manufactured and statically balanced to ISO 1940 (1973) to class G16.
Rated 0 out of 5
Original price was: $625.79.Current price is: $250.32.
Add to cart
Sale!
Warranty Included Gates 77606108 A/4L Quick-Link Quick-Link – Emergency V-Belts
Top Width: 1/2″
Std. Box: 25 ft.
Material ID: 77606108
Drop-in replacement for classical section V-belts.
Always have the right spare – make to any length by hand.
Available in standard classical cross sections.
Highly resistant to oil, grease, water, chemicals, solvents, and temperatures from -40F to +240F (-40C to +116C).
Industry standard power ratings.
Install in minutes – even on captive drives.
Rated 0 out of 5
Original price was: $21.88.Current price is: $10.94.
Add to cart
Sale!
Warranty Included Gates 78817058 TL84L050 PowerGrip Timing Pulleys
Pitch: 0.375″
Pitch Diameter: 10.027″
Width: 0.500″
Number of Teeth: 84
Bore or Bushing: Taper-Lock
Material ID: 78817058
Gates timing belt pulleys are precisely engineered for positive press fit with minimum belt wobble, designed to optimize the performance and durable working service life of your Gates timing belt drive system. If you have a nonstandard belt drive system, the Gates Made-to-Order Metals team can work with you to design a custom engineered solution.
Rated 0 out of 5
Original price was: $308.27.Current price is: $123.31.
Add to cart
Sale!
Warranty Included Gates 90932162 2/B162 Hi-Power II PowerBand V-Belts
Strands: 2
Cross Section: B
Sectional Top Width: 21/32″
Total Top Width: 1 1/3″
Depth: 13/32″
Outside Circumference: 165″
Material ID: 90932162
Gates Hi-Power PowerBand V-Belt construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. It offers a solution for drives where single belts vibrate, turn over or jump off the pulleys. They consist of several V-belts joined together by a permanent, high strength tie band offering a tougher more stable solution compared to a single belt.
Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads.
Strong band controls belt-to-belt distance and prevents sideways bending.
Elastomeric compound protects the belt against heat, ozone and sunlight.
Rated 0 out of 5
Original price was: $144.24.Current price is: $57.70.
Add to cart
Sale!
Warranty Included Gates 90945360 5/C360 Hi-Power II PowerBand V-Belts
Strands: 5
Cross Section: C
Sectional Top Width: 7/8″
Total Top Width: 4 3/8″
Depth: 17/32″
Outside Circumference: 362″
Material ID: 90945360
Gates Hi-Power PowerBand V-Belt construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. It offers a solution for drives where single belts vibrate, turn over or jump off the pulleys. They consist of several V-belts joined together by a permanent, high strength tie band offering a tougher more stable solution compared to a single belt.
Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads.
Strong band controls belt-to-belt distance and prevents sideways bending.
Elastomeric compound protects the belt against heat, ozone and sunlight.
Rated 0 out of 5
Original price was: $1,092.01.Current price is: $436.80.
Add to cart

0