Gates Rubber

Showing 1216–1224 of 1315 results

Sale!
Special Discount Gates 938912106 12/5VX1060 Super HC Molded Notch PowerBand Belts
Cross Section: 5VX
Strands: 12
Sectional Top Width: 5/8″
Total Top Width: 7 1/2″
Depth: 35/64″
Outside Circumference: 106.00″
Material ID: 938912106
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
The Tie Band assures high lateral rigidity, guiding the belt” a straight line and preventing it from coming off the drive.
Meets RMA oil and heat resistant standards and static conductivity requirements.
Rated 0 out of 5
Original price was: $1,444.45.Current price is: $577.78.
Add to cart
Sale!
Special Discount Gates 98040220 1930V541 Multi-Speed Belts
Top Width: 1 3/16″
Outer Length: 55.00″
Material ID: 98040220
Gates Multi-Speed belts are manufactured with a banded or bandless construction featuring high-modulus, fiber-loaded stock that offers transverse rigidity and flexibility for higher load capacity and longer service life on your variable speed drives.
Notch Design reduced thermal and bending stresses for longer life.
Smooth running construction for minimal vibration at high speeds.
Uniform composition and thickness of the undercord ensure smooth and silent running.
Rated 0 out of 5
Original price was: $135.03.Current price is: $54.01.
Add to cart
Sale!

Special Discount Gates 98231067 30C3636 G-Force C12 Belts
Rated 0 out of 5
Original price was: $272.93.Current price is: $109.17.
Add to cart
Sale!
Special Offer Gates 77192056 14MX-56S-20 Poly Chain GT2 Sprockets
Pitch: 14mm
Width: 20mm
Pitch Diameter: 9.825″
Number of Teeth: 56
Material ID: 77192056
Genuine, strong, durable sprockets designed for use with high power density Gates Poly Chain Carbon Volt, Poly Chain GT2, and Poly Chain GT Carbon belts.
Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer.
Poly Chain GT2 Sprockets keep overhung load below manufacturers’ recommendation.
Precisely manufactured and statically balanced to ISO 1940 (1973) to class G16.
Rated 0 out of 5
Original price was: $299.24.Current price is: $119.70.
Add to cart
Sale!
Special Offer Gates 77196038 14MX-38S-68 Poly Chain GT2 Sprockets
Pitch: 14mm
Width: 68mm
Pitch Diameter: 6.667″
Number of Teeth: 38
Material ID: 77196038
Genuine, strong, durable sprockets designed for use with high power density Gates Poly Chain Carbon Volt, Poly Chain GT2, and Poly Chain GT Carbon belts.
Smaller, narrower sprockets save shaft space, keep the load closer to bearing and extend life of reducer.
Poly Chain GT2 Sprockets keep overhung load below manufacturers’ recommendation.
Precisely manufactured and statically balanced to ISO 1940 (1973) to class G16.
Rated 0 out of 5
Original price was: $374.55.Current price is: $149.82.
Add to cart
Sale!
Special Offer Gates 78817032 TL18H200 PowerGrip Timing Pulleys
Pitch: 0.500″
Pitch Diameter: 2.865″
Width: 2.000″
Number of Teeth: 18
Bore or Bushing: Taper-Lock
Material ID: 78817032
Gates timing belt pulleys are precisely engineered for positive press fit with minimum belt wobble, designed to optimize the performance and durable working service life of your Gates timing belt drive system. If you have a nonstandard belt drive system, the Gates Made-to-Order Metals team can work with you to design a custom engineered solution.
Rated 0 out of 5
Original price was: $151.06.Current price is: $60.42.
Add to cart
Sale!
Special Offer Gates 84236928 5L280K PoweRated V-Belts
Cross Section: 5L
Top Width: 21/32″
Depth: 3/8″
Outside Circumference: 28″
Material ID: 84236928
PoweRated V-Belts are designed as an alternative to conventional light-duty belts, with high-performance construction to deliver more horsepower, less stretch, and provide longer service life. PoweRated belts are suitable for outdoor power equipment, appliances, and industrial applications where Fractional Horsepower (FHP) belts are typically used. They are recommended for heavy-duty drives and clutching applications. Meets the requirements of high power, clutching ability, heavy shock load absorption and back idler driven lawn and garden equipment.
Meets RMA oil and heat-resistant standards, but not for static conductivity.
Low cord positioning in thin profile gives extreme flexibility.
Temperature Range: -30C to +60C (-22F to +140F).
Rated 0 out of 5
Original price was: $21.57.Current price is: $10.79.
Add to cart
Sale!
Special Offer Gates 90925071 5/A71 Hi-Power II PowerBand V-Belts
Strands: 5
Cross Section: A
Sectional Top Width: 1/2″
Total Top Width: 2 1/2″
Depth: 5/16″
Outside Circumference: 73″
Material ID: 90925071
Gates Hi-Power PowerBand V-Belt construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. It offers a solution for drives where single belts vibrate, turn over or jump off the pulleys. They consist of several V-belts joined together by a permanent, high strength tie band offering a tougher more stable solution compared to a single belt.
Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads.
Strong band controls belt-to-belt distance and prevents sideways bending.
Elastomeric compound protects the belt against heat, ozone and sunlight.
Rated 0 out of 5
Original price was: $89.47.Current price is: $44.73.
Add to cart
Sale!
Special Offer Gates 90933168 3/B168 Hi-Power II PowerBand V-Belts
Strands: 3
Cross Section: B
Sectional Top Width: 21/32″
Total Top Width: 2″
Depth: 13/32″
Outside Circumference: 171″
Material ID: 90933168
Gates Hi-Power PowerBand V-Belt construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. It offers a solution for drives where single belts vibrate, turn over or jump off the pulleys. They consist of several V-belts joined together by a permanent, high strength tie band offering a tougher more stable solution compared to a single belt.
Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads.
Strong band controls belt-to-belt distance and prevents sideways bending.
Elastomeric compound protects the belt against heat, ozone and sunlight.
Rated 0 out of 5
Original price was: $211.86.Current price is: $84.74.
Add to cart

0