Gates Rubber

Showing 1180–1188 of 1315 results

Sale! $Save Now Gates 84003780 5L780 Truflex V-Belts <ul><li>Cross Section: 5L</li><li>Top Width: 21/32"</li><li>Thickness: 3/8"</li><li>Outside Circumference: 78.00"</li><li>Material ID: 84003780</li></ul>Truflex belts are engineered with superior length stability for minimal take-up requirements, perfect for all industrial, light-duty applications, including fractional horsepower (FHP) motors and applications using backside idlers. Flex-bonded cords are strongly secured to the belts body for equal load distribution and absorption of bending stress without cord deterioration. Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. The Flex-Weave Cover is constructed for longer cover life, providing the belt's core with extended protection from oil, dirt, and heat.<ul><li>Meets RMA oil and heat-resistant standards and static conductivity requirements.</li><li>Note: Truflex belts are offered in cross sections 2L (0), 3L (1), 4L (2), 5L (3).</li><li>Runs with smooth, quiet operation.</li></ul>$
Save Now Gates 84003780 5L780 Truflex V-Belts
Cross Section: 5L
Top Width: 21/32″
Thickness: 3/8″
Outside Circumference: 78.00″
Material ID: 84003780
Truflex belts are engineered with superior length stability for minimal take-up requirements, perfect for all industrial, light-duty applications, including fractional horsepower (FHP) motors and applications using backside idlers. Flex-bonded cords are strongly secured to the belts body for equal load distribution and absorption of bending stress without cord deterioration. Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. The Flex-Weave Cover is constructed for longer cover life, providing the belt’s core with extended protection from oil, dirt, and heat.
Meets RMA oil and heat-resistant standards and static conductivity requirements.
Note: Truflex belts are offered in cross sections 2L (0), 3L (1), 4L (2), 5L (3).
Runs with smooth, quiet operation.
Rated 0 out of 5
Original price was: $25.50.Current price is: $12.75.
Add to cart
Sale!
Save Now Gates 89020800 5M800 Polyflex Belts
Cross Section: 5M
Nominal Top Width: 1/5″
Effective Length: 31.50″
Material ID: 89020800
Gates Polyflex Belts provide a versatile power transmission solution when space is at a premium. Their unique 60 angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts. This compact and strong belt with nominal top width from 3 mm to 11 mm transmits more power and allows high speed ratios. Polyflex is suited for extremely small diameter pulleys and very compact drives with high rotational speeds. Ideal for use on machines and machine tools requiring high performance and smooth operation in limited space such as bench type milling machines, lathe drives, woodworking and metalworking machine spindle drives, computer peripheral equipment, small blowers, etc.
High Modulus Polyurethane compound (HMPE) resists fatigue, wear, ozone, and most environmental conditions.
Precision casting eliminates layers and overlaps to enable low vibration operation.
Temperature Range: -54 C up to +85 C (-65 F up to +185 F).
Rated 0 out of 5
Original price was: $22.77.Current price is: $11.38.
Add to cart
Sale!

Save Now Gates 90032064 B64 Hi-Power II Belts
Rated 0 out of 5
Original price was: $12.56.Current price is: $6.28.
Add to cart
Sale!
Save Now Gates 90933064 3/B64 Hi-Power II PowerBand V-Belts
Strands: 3
Cross Section: B
Sectional Top Width: 21/32″
Total Top Width: 2″
Depth: 13/32″
Outside Circumference: 67″
Material ID: 90933064
Gates Hi-Power PowerBand V-Belt construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. It offers a solution for drives where single belts vibrate, turn over or jump off the pulleys. They consist of several V-belts joined together by a permanent, high strength tie band offering a tougher more stable solution compared to a single belt.
Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads.
Strong band controls belt-to-belt distance and prevents sideways bending.
Elastomeric compound protects the belt against heat, ozone and sunlight.
Rated 0 out of 5
Original price was: $74.67.Current price is: $37.34.
Add to cart
Sale!
Save Now Gates 93320800 3V800 Super HC Belts
Cross Section: 3V
Top Width: 3/8″
Depth: 21/64″
Outside Circumference: 80″
Material ID: 93320800
The Gates Super HC V-belt combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. It transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC V-belts also have exclusive Gates construction features for longer life on your drives!
Meets RMA oil and heat resistant standards and static conductivity requirements.
Up to 300% capacity increase over classical belts.
Temperature Range: -30C to +60C (-22F to +140F).
Rated 0 out of 5
Original price was: $29.97.Current price is: $14.98.
Add to cart
Sale!
Save Now Gates 93893056 3/5VX560 Super HC Molded Notch PowerBand Belts
Cross Section: 5VX
Strands: 3
Sectional Top Width: 5/8″
Total Top Width: 1 7/8″
Depth: 35/64″
Outside Circumference: 56.00″
Material ID: 93893056
The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip, or jump off the drive.
Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration.
Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves.
Patented Ethylene (EPDM) Material construction provides -51C to +121C (-60F to +250F) temperature range to resist belt cracking.
The Tie Band assures high lateral rigidity, guiding the belt” a straight line and preventing it from coming off the drive.
Meets RMA oil and heat resistant standards and static conductivity requirements.
Rated 0 out of 5
Original price was: $170.97.Current price is: $68.39.
Add to cart
Sale!

Save Now Gates 98271080 44G3569 G-Force Belts
Rated 0 out of 5
Original price was: $173.58.Current price is: $69.43.
Add to cart
Sale!
Seasonal Sale Gates 78817094 TL96H200 PowerGrip Timing Pulleys
Pitch: 0.500″
Pitch Diameter: 15.279″
Width: 2.000″
Number of Teeth: 96
Bore or Bushing: Taper-Lock
Material ID: 78817094
Gates timing belt pulleys are precisely engineered for positive press fit with minimum belt wobble, designed to optimize the performance and durable working service life of your Gates timing belt drive system. If you have a nonstandard belt drive system, the Gates Made-to-Order Metals team can work with you to design a custom engineered solution.
Rated 0 out of 5
Original price was: $662.74.Current price is: $265.10.
Add to cart
Sale!
Seasonal Sale Gates 78820018 P22-3M-06AL PowerGrip HTD Sprockets
Pitch: 3mm
Pitch Diameter: 0.827″
Belt Width: 6mm
Number of Teeth: 22
Material: Aluminum
Bore Range: 1/4″ – 1/4″
Material ID: 78820018
PowerGrip HTD Sprockets are engineered specifically for use with your Gates PowerGrip HTD belts.
Full split in bushing allows for easy installation and removal.
Precise sprocket design produces positive, press fit to shaft.
Precision manufactured and static balanced to eliminate sprocket wobble.
Warning: Do not use these sprockets with rim speeds in excess of 6, 500 fpm.
Rated 0 out of 5
Original price was: $31.63.Current price is: $15.81.
Add to cart

0